Dell PowerEdge R200 - Page 65

Installing System Components 65
Figure 3-8. Removing the HDD1 Hard-Drive Carrier
6 Using a #2 Phillips screwdriver, remove the four screws that secure the
hard drive to the carrier and remove the drive from the carrier. See
Figure 3-9 and Figure 3-10.
1 HDD1 hard-drive
carrier
2 plunger 3 power cable
4 interface cable 5 notches (4) 6 tabs (4)
2
1
3
4
6
5
book.book Page 65 Thursday, August 30, 2007 3:30 PM