Dell PowerEdge R510 - Rails and Cable Management

Dell
PowerEdge R510 Technical Guide 28
4.7 Rails and Cable Management
ReadyRails
TM
Sliding Rails for 4-post Racks support:
 Toolless installation in 19‖ EIA-310-E compliant square or unthreaded round hole 4-post racks
including all generations of Dell racks
o NOTE: Threaded 4-post racks require the ReadyRails static rails listed below or 3
rd
party
offerings available through Dell Software & Peripherals
 Full extension of the system out of the rack to allow serviceability of key internal components
 Optional cable management arm (CMA)
ReadyRails Sliding Rails for 4-post Racks dimensions:
 Rail depth without the CMA: 714 mm
 Rail depth with the CMA: 845 mm
 Square-hole rack adjustment range: 686-883 mm
 Round-hole rack adjustment range: 672-876 mm
ReadyRails Static Rails for 4-post & 2-post Racks support:
 Toolless installation in 19‖ EIA-310-E compliant square or unthreaded round hole 4-post racks
including all generations of Dell racks
 Tooled installation in 19‖ EIA-310-E compliant threaded hole 4-post and 2-post racks
ReadyRails Static Rails for 4-post & 2-post Racks dimensions:
 Rail depth: 622 mm
 Square-hole rack adjustment range: 608-879 mm
 Round-hole rack adjustment range: 594-872 mm
 Threaded-hole rack adjustment range: 604-890 mm