Dell PowerEdge R510 - 6 Processors; Table 13. Supported Processors

Dell
PowerEdge R510 Technical Guide 42
6 Processors
R510 can operate in either single-processor or dual-processor mode. However, since the memory controller
is embedded in the processor, when only one processor is installed in the system, it supports 4 DIMMs, with
minimum memory of 1GB and maximum memory of 64GB (based on the 16GB module). When two processors
are installed in the system, it supports 8 DIMMs, min. 2GB and max 128GB (based on the 16GB module).
Table 13. Supported Processors
Model
Speed
Power
QPI
L3 Cache
Features
DDR3
Memory
Bus Speed
Cores
X5670
2.93GHz
95W
6.4 GT/s
12M cache
Turbo, HT
1333
6
X5660
2.80GHz
95W
6.4 GT/s
12M cache
Turbo, HT
1333
6
X5650
2.66GHz
95W
6.4 GT/s
12M cache
Turbo, HT
1333
6
X5560
2.80GHz
95W
6.4 GT/s
8M cache
Turbo, HT
1333
4
E5640
2.66GHz
80W
5.86 GT/s
12M cache
Turbo, HT
1066
4
L5640
2.26GHz
60W
5.86 GT/s
12M cache
Turbo, HT
1066
6
E5630
2.53GHz
80W
5.86 GT/s
12M cache
Turbo, HT
1066
4
L5609
1.86GHz
40W
4.8 GT/s
12M cache
Turbo, HT
800
4
E5620
2.40GHz
80W
5.86 GT/s
12M cache
Turbo, HT
1066
4
E5530
2.40GHz
80W
5.86 GT/s
8M cache
Turbo, HT
1066
4
L5520
2.26GHz
50W
5.86 GT/s
8M cache
Turbo, HT
1066
4
E5507
2.26GHz
80W
4.8 GT/s
4M cache
—
800
4
E5506
2.13GHz
80W
4.8 GT/s
4M cache
—
800
4
E5503
2.00GHz
80W
4.8 GT/s
4M cache
—
800
2
QPI or Quick Path Interconnect: A point-to-point processor interconnect developed by Intel which is defined using
Gigatranfers per second (GT/s), referring to a number of data transfers or operations.
Turbo: Feature that increases the speed of the processor on demand (from OS) if the CPU is operating below
power/thermal specifications.
HT: Intel Hyper-threading technology.