24 Rack Installation Guide
Figure 1-11. Installing the Cable-Management Arm Ramp Assembly
NOTE: In Figure 1-11, the cable-management arm is attached on the right side of
the rack and the left cable-management arm ramp assembly is attached to the left
side of the rack. Conversely, if you attach the cable-management arm on the left
side of the rack, attach the right cable-management arm ramp assembly to the right
side of the rack.
Replacing the Rack Doors
See the procedures for replacing doors in the documentation provided
with your rack.
CAUTION: Because of the size and weight of the rack cabinet doors,
never attempt to remove or install them by yourself.
1 ramp assembly
bracket
2 cable-management arm
ramp assembly latch
3 ramp assembly
release button
4 ramp assembly
seating catch
5 left cable-management
arm ramp assembly
6 ramp assembly
wireform guide
6
2
3
4
1
5
To Next Page
Loading...
