Figure 42. PCIe connector slots on system board
1. PCIe Slot 1 (CPU 1)
2. PCIe Slot 2 (CPU 1)
Table 65.
PCIe Riser Configurations
Config No. Riser configuration No. of Processors PERC type supported Rear storage possible
0 N/A 1 Adapter No
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 66.
Configuration : No Riser
Card type Slot priority Maximum number of cards
FOXCONN (aPERC 11) 2,1 1
FOXCONN (aPERC HBA11) 2,1 2
FOXCONN (External Adapter) 2,1 2
Intel (NIC:10Gb) 2,1 2
Broadcom (NIC:10Gb) 2,1 2
Intel (NIC:1Gb) 2,1 2
FOXCONN (BOSS-N1) INT 1
Disassembly and reassembly 77
To Next Page