Dell PowerEdge - Page 4

4 Contents
Cluster Ready Services (CRS) . . . . . . . . . . . . . . 11
CRS fails prematurely when trying to start . . . . . 11
The Oracle Clusterware installation
procedure fails . . . . . . . . . . . . . . . . . . . 11
CRS fails to start when you reboot the nodes,
or after entering /etc/init.d/init.crs start . . . . . . 12
When you run root.sh, CRS fails to start . . . . . . 12
Node continuously reboots . . . . . . . . . . . . . 14
CRS fails to start when you reboot the nodes,
or after entering /etc/init.d/init.crs start . . . . . . 15
Database Configuration Assistant (DBCA) . . . . . . . 16
There is no response when you click OK in
the DBCA Summary window . . . . . . . . . . . . 16
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . 16
You receive dd failure error messages
while installing the software using
Dell Deployment CD 1 . . . . . . . . . . . . . . . . 16
When connecting to the database as a user
other than oracle, you receive the error
messages ORA01034: ORACLE not available
and Linux Error 13: Permission denied . . . . . . . 16
Installation . . . . . . . . . . . . . . . . . . . . . . . . 17
Oracle software fails to install on the nodes . . . . 17
When you run root.sh, the utility fails to
format the OCR disk . . . . . . . . . . . . . . . . . 17
Networking. . . . . . . . . . . . . . . . . . . . . . . . 17
The cluster verification check fails . . . . . . . . . 17
Fibre Channel Storage System . . . . . . . . . . . . . . 18
You receive I/O errors and warnings when
you load the Fibre Channel HBA driver module . . 18