Dell POWERVAULT MD3600F - Configuring CIM Server

Installing and Uninstalling the SMI-S Provider 11
Configuring CIM Server
Use the following commands to perform basic CIM server configuration
operations.
NOTE: Restart the OpenPegasus server after executing any of the following
commands.
• To set an http port:
# cimconfig -s httpPort=<port> -p
• To set an https port:
# cimconfig -s httpsPort=<port> -p
• To enable or disable the http connection:
# cimconfig -s enableHttpConnection={true | false}
-p
• To enable or disable the https connection:
# cimconfig -s enableHttpsConnection={true |
false} -p
• To enable or disable authentication:
# cimconfig -s enableAuthentication={false | true}
–p
• To add a user for defining the credentials for CIM client to authenticate
with the CIM server:
# cimuser -a -u username -w password
• To remove a user:
# cimuser -r -u username -w password
book.book Page 11 Thursday, February 10, 2011 12:14 PM