Contents 5
My PowerVault TL2000/TL4000 is configured
for library-managed encryption and my
RMU shows an error condition
with no associated text
. . . . . . . . . . . . . . . 24
When I attempt to add a drive manually
using adddrive in the CLI, it asks for a
12-digit drive serial number. The drive
serial number is only 10 digits
. . . . . . . . . . . 24
How is my backup application affected
when I configure the library for
library-managed encryption?. . . . . . . . . . . . 24
How does EKM handle the addition of
new drives or the replacement of bad drive?
. . . 25
How does EKM handle the addition of a
new library or the replacement
of a bad library?. . . . . . . . . . . . . . . . . . . 25
How is compression affected by
encryption and vice versa?. . . . . . . . . . . . . 25
Is there a performance impact
with encryption? . . . . . . . . . . . . . . . . . . 25