Overview: DR Series System Release Notes
The Release Notes for 2.0.1.0 are intended to supplement the Dell DR Series system documentation set available at the
Dell Support Site:
dell.com/support/Manuals/us/en/04/Product/powervault-dr4100
dell.com/support/Manuals/us/en/04/Product/powervault-dr4000
The release notes contain details about the preinstalled system software on the Dell DR Series appliances. It also
documents the latest known updates, issues, resolutions, and other information needed for use with the DR Series
system, 2.0.1.0 release (release build number: 2.0.1163.0).
NOTE: Dell recommends that you check for the latest versions of the DR Series system documentation available
from Dell. For a complete list of the DR Series system documentation, see Related DR Series System
Documentation.
Supported Software and Hardware
For a complete list of the supported hardware and software for the Dell DR Series system, see the
Dell DR Series System
Interoperability Guide
at dell.com/support/manuals.
Checking System Information
Before troubleshooting issues with any DR Series system, ensure that the installed DR Series system software is up to
date. You can check the software version against the latest versions available at the following website when you
provide the Service Tag of your system (or choose from a list of Dell products):
dell.com/support/drivers/us/en/04/DriversHome/ShowProductSelector?fkey=Drivers_PS
For information about how to check the current version of the DR Series system software installed, see:
• "Verifying the Current Software Version" in Chapter 7 of the
Dell DR Series System Administrator Guide
at
dell.com/support/manuals.
• "System" (system --show --version command) in Chapter 3 of the
Dell DR Series System Command Line
Reference Guide
at dell.com/support/manuals.
DR Series System: Drive And System Capacities
The following table defines the internal system drive capacity and available physical capacity (in decimal and binary
values) in the release 1.0.1.2 and later releases of DR4000 systems. Since the 2.0 release, the DR Series system comes in
two types:
DR4000 system which consists of preinstalled DR Series system software on a modified Dell R510 appliance
platform.
DR4100 system which consists of preinstalled DR Series system software on a modified Dell R720xd appliance
platform.
The capacity values listed here represent the internal drive and available physical capacities that have been adjusted
for the associated overhead in the DR4000/DR4100 system releases.
5
To Next Page
Loading...
