11 Setting up NetVault Backup Native Virtual Tape Library on the Dell™ DR4X00 Disk Backup Appliance
2 Install and Configure the DR4X00
1. Rack and cable the DR4X00 appliance, and power it on.
2. Log into iDRAC using the default address 192.168.0.1, user name root, and the password
calvin.
3. Launch the virtual console.
4. Once the virtual console is open, log in to the system as user administrator and the password
St0r@ge! (The “0” in the password is the numeral zero.).
To Next Page
Loading...
