Dell PowerVault TL2000 User Guide Addendum

Dell PowerVault TL2000/TL4000 User's Guide for instructions on locating this
information:
• Table 1.2 for library serial number
• Table 5.6 for library worldwide node name If this does not resolve your
issue, please contact Dell technical support.
3 Configure library-managed encryption on your library. Please refer to Figure
4-24 in the Dell PowerVault TL2000/TL4000 User's Guide for instructions.
4 Install the Dell Encryption Key Manager (EKM) application on the server
designated for EKM. Please refer to Chapter 3.0 of the Dell Encryption Key
Manager User's Guide for instructions. This document can be found at
http://support.dell.com.
5 Configure the EKM application. Please refer to Chapter 4.0 of the Dell
Encryption Key Manager User's Guide for instructions.
6 Start the EKM application. Please refer to Chapter 5.0 of the Dell Encryption
Key Manager User's Guide for instructions.
Information in this document is subject to change without notice.
© 2010 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerVault are trademarks of Dell
Inc.
Other trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in
trademarks and trade names other than its own.

Dell PowerVault TL2000 Specifications

General

Number of Drives	1 or 2
Number of Slots	24
Type	Tape Library
Drive Types	LTO-4, LTO-5, LTO-6
Interface	SAS, Fibre Channel
Dimensions	8.68 in (22.05 cm) x 19.0 in (48.26 cm) x 30.0 in (76.2 cm)
Tape Drive Compatibility	LTO-4, LTO-5, LTO-6
Power Supply	Redundant power supplies optional
Operating Temperature	50°F to 95°F (10°C to 35°C)
Non-operating Temperature	-40°F to 140°F (-40°C to 60°C)