Configuring the iSCSI bridge
Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User’s Guide Rev.C Page 25
7.4 Setting the Password
This configuration page will allow the user to change the access password for the GUI.
From within the main menu select the Password and Security icon under the Network section.
The GUI will now display the following window.
Figure 20 Network configuration, password page
To change your password, type the existing password and the new password into the appropriate boxes and
press Change Password. The password can be a maximum of 16 characters.
Important:
It is not possible to reset the password without logging into the GUI.
Ensure you remember your password!
To Next Page
Loading...
