Appendix A
Page 42 Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User’s Guide Rev.C
Click on the IP-address tab.
Make a Note of your current set up then:
Click on the Specify an IP-address button.
Enter 10.10.10.11into the IP-address field.
Enter 255.255.255.0 into the Subnet-Mask field.
Finally click the OK button and reboot your computer.
Note:
Once you have completed the initial set up of the iSCSI bridge, return
your computer to the original settings and reconnect to the iSCSI bridge.
To Next Page
Loading...
