About this task
The following images indicate the location of the PCIe holder and provide a visual representation of the removal procedure.
Steps
1. Remove the PCIe-power cables from the slots on the PCIe holder.
2. Push and hold the PCIe-holder latch upwards to release the PCIe holder.
3. Lift and remove the PCIe holder out of the computer.
Installing the PCIe holder
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the PCIe holder and provide a visual representation of the installation procedure.
36
Removing and installing components
To Next Page
Loading...
