Steps
1. Align the powered GPU with the PCI-Express card connector on the system board.
2. Using the alignment post, connect the graphics card to the connector and press down firmly. Ensure that the graphics card
is firmly seated.
3. Slide the release latch down on the PCIe-holder to secure the PCIe-card bracket.
4. Connect the PCIe-power cable to the connectors on the graphics card.
5. Connect the PCIe-power cables to the slots on the PCIe holder.
Next steps
1. Install the air shroud.
2. Install the side cover.
3. Follow the procedure in After working inside your computer.
Removing and installing components
67
To Next Page
Loading...
