Dell Precision 7920 Rack - Disassembly and Reassembly; Front Bezel

11. Assign a new system and/or setup password.
Disassembly and reassembly
The following sections contain the procedures for removing and replacing system components.
Front Bezel
Removing the optional front bezel
Steps
1. Locate and remove the bezel key.
NOTE: The bezel key is attached to the LCD bezel package.
2. Unlock the bezel by using the key.
3. Press the release button to release the bezel, and pull the left end of the bezel.
4. Unhook the right end, and remove the bezel.
Installing the optional front bezel
Steps
1. Locate and remove the bezel key.
NOTE: The bezel key is attached to the LCD bezel package.
2. Align and insert the right end of the bezel onto the system .
Disassembly and reassembly
35