Air shroud
Removing air shroud
Prerequisites
CAUTION:
Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in
shutdown of the system and loss of data.
1. If installed, remove the full length PCIe cards.
2. If applicable, remove the GPU cards.
Steps
Hold the shroud at both ends and lift it away from the system.
Next steps
Install the shroud.
Installing air shroud
Prerequisites
1. If applicable, route the cables inside the system along the system wall and secure the cables by using the cable securing
bracket.
Steps
1. Align the tabs on the air shroud with the slots on the system.
2. Lower the air shroud into the system until it is firmly seated.
When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets.
Next steps
1. If removed, install the full length PCIe cards.
2. If applicable, install the GPU cards.
38
Disassembly and reassembly
To Next Page
Loading...
