AMT Configuration
The table below lists the default settings for the Intel Management Engine BIOS Extension (MEBx) on AMT configuration page.
Manageability/Feature Selection
SOL/IDER
Username and Password
Disabled
Enabled *
SOL
Disabled
Enabled *
IDER
Disabled
Enabled *
Legacy Redirection Mode
Disabled
Enabled *
KVM
Disabled
Enabled *
User Consent
User Opt-in
None
KVM *
All
Opt-in Configurable from remote IT
Disable Remote Control of KVM Opt-In Policy
Enable Remote Control of KVM Opt-In Policy *
NOTE: In order for KVM to work, the requirement must be an Intel i3/i5/i7/Celeron/Pentium CPU.
Password Policy
Password Policy
Default Password Only *
During Setup and Configuration
Anytime
Network Setup
Network Name Settings
Host Name blank
Domain Name blank
Shared / Dedicated FQDN
Dedicated
Shared *
Dynamic DNS Update
Disabled *
Enabled
TCP/IP Settings
Wired LAN IPv4 Configuration
DHCP Mode
Disabled
Enabled *
Below configuration page will only available if enabled selected
To Next Page
Loading...
