Installing The Expansion Card
1. Insert the PCIe x4 card into the connector on the system board and press down until
it is securely in place.
2. Insert the PCIe card into the connector on the system board and press down until it
is securely in place.
3. Insert the PCIe x1 card into the connector on the system board and press down until
it is securely in place.
4. Insert the PCIe x16 card into the connector on the system board and press down
until it is securely in place.
5. Press the retention tab on the card-retention latch downwards.
6. Install the Cover.
7. Follow the procedures in After Working Inside Your Computer.
Related Links
Removing The Expansion Card
17
To Next Page
Loading...
