Dell Precision T1600 - Processor; Removing The Heat Sink And Processor

10
Processor
Removing The Heat Sink And Processor
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the Cover.
3. Disconnect the heat sink/fan assembly cable from the system board.
4. Use a Phillips screwdriver to loosen the captive screws securing the heat sink/fan
assembly to the system board.
5. Lift the heat sink/fan assembly upward gently, and remove it from the system. Lay
the assembly with the fan facing downward, and with the thermal grease facing
upward.
29