5. Open the latch securing the thermal sensor and remove it from the computer.
Installing the Thermal Sensor
1. Install the thermal-sensor cable on the system board.
2. Route the thermal-sensor cable around the computer chassis.
3. Fasten the latch that secures the thermal-sensor cable.
4. Install:
a. air tunnel (if available)
b. right cover
c. left cover
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a. cover
b. air tunnel (if available)
c. heatsink
41
To Next Page
Loading...
