5. Remove the screws that secure the hard-drive fan to the front of the chassis and remove the fan from the
computer.
Installing the Hard-Drive Fan
1. Install the screws that secure the hard-drive fan to the front of the chassis.
2. Route the hard-drive fan cable through the chassis and connect it to its slot on the system board.
3. Install:
a. PCI card
b. left cover
c. right cover
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Power Supply Unit (PSU) Card
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the right cover.
44
To Next Page
Loading...
