Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]
1 tabs (2)
2 airflow shroud
Removing the Airflow Shroud Insert
If you have added a second processor to your computer, you must remove the insert from the airflow shroud in order to
install the processor airflow shroud.
1. Press in the single tab on the left side of the shroud.
2. While pressing the tab inward, slide the insert out of the shroud.
To Next Page
Loading...
