Dell Precision Workstation 470 - Removing a Hard Drive

Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]
Removing a Hard Drive
1. Press in on the top shroud tabs and tilt the shroud back.
2. Lift the shroud away from the hard drive.
3. Disconnect the power and hard-drive cables from the drive.
4. Press in on the tabs on each side of the drive and slide the drive up and out.