Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]
1 bracket within slot
2 bracket caught outside of slot
3 fully seated card
4 not fully seated card
19. Before you lower the retention arm, ensure that:
The tops of all cards and filler brackets are flush with the alignment bar.
The notch in the top of the card or filler bracket fits around the alignment guide.
20. Press the retention arm into place, securing the card(s) in the computer.
1 filler bracket
2 alignment bar
To Next Page
Loading...
