Troubleshooting | 37
Recover HDMI version
Your monitor provides a HDMI version recovery failsafe mechanism. HDMI switches to
version 2.0 when one of the Smart HDR modes is selected. If the screen goes blank after
switching to HDMI version 2.0, perform the following steps to revert to HDMI version 1.4 :
1 Press any of the menu key to wake up the monitor.
2 Press any of the menu key to enter the input source select menu.
3 Use the and buttons to select to the current HDMI port, then press button
and hold 8 seconds to enter the HDMI 1.4 failsafe dialog.
4 Press to enable the HDMI version 1.4 .
To Next Page
Loading...
