Dell S560T User Manual

Using Interactive Pen (Only for S560P) 23
Pen Calibration
1 Switch to display mode "Projector only".
2 Perform touch calibration on S560P using the S560x interactive utility
(Win, Mac).
3 Select auto-calibration while running the S560X interactive utility.
NOTE: If the fail message pops up, follow below steps to trouble-
shoot and do Auto Calibration again.
• Close all software applications
• Reduce ambient light
• Do not obstruct or shake lens during calibration
• Check if projected image is clear, if not, adjust focus to sharpen the
image
If auto-calibration fails, setup using 'manual calibration'.
4 Select Manual Calibration, and follow the steps for calibration. Manual
Calibration is suggested to get a better accuracy.

Dell S560T Specifications

General

Brand	Dell
Model	S560T
Category	Projector
Language	English