Dell SE2716H - Removing the Monitor Stand

22 | Setting Up the Monitor
Removing the Monitor Stand
CAUTION: To prevent scratches on the LCD screen while removing the
stand,make sure that the monitor is placed on a soft, clean foam.
Direct contact with hard objects might cause damage to the curved monitor.
NOTE: The procedure below is applicable for the default stand. If you
purchased any other stand, see the documentation shipped with the stand to
set it up.
To remove the stand:
1 Place the monitor on paper cushion or thick sitting mat.
2 Use a screwdriver hold the release button.
3 Pull the stand neck in the arrow direction to detach the stand.
CAUTION: If the paper cushion is unavailable, use a thick sitting mat.
2
3