About your monitor │ 9
Product features
The Dell SE2722H/SE2722HX monitor has an active matrix, Thin-Film Transistor
(TFT), Liquid Crystal Display (LCD), anti-static, and LED backlight. The monitor
features include:
• 68.47 cm (27.0 in.) viewable area display (measured diagonally).
• 1920 x 1080 resolution, with full-screen support for lower resolutions.
• Easy and simple connectivity with legacy and new systems via HDMI.
• Supports 48 Hz to 75 Hz（HDMI) in FreeSync Mode.
• Supports AMD FreeSync™ technology,
• Plug and play capability if supported by your computer.
• On-Screen Display (OSD) adjustments for ease of setup and screen optimization.
• Removable stand and Video Electronics Standards Association (VESA™) 100 mm
mounting holes for flexible mounting solutions.
• Security-lock slot.
• ≤0.3 W in Standby Mode.
• Supports Dell Display Manager.
• Optimize eye comfort with a TÜV-certified flicker-free screen.
WARNING: If provided with a 3-pin attachment plug on the power cord,
plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the
power cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature.
Please confirm the distribution system in building installation shall provide
the circuit breaker rated 120/240V, 20A (maximum).
WARNING: The possible long-term effects of blue light emission from
the monitor may cause damage to the eyes, including eye fatigue, digital
eye strain, and so on. a TÜV-certified ComfortView is designed to reduce
the amount of blue light emitted from the monitor to optimize eye comfort.
To Next Page
Loading...
