Dell SP2208W FP - Webcam-MIC Specifications

Flat Panel Specifications
Screen type
Active matrix - TFT LCD
Screen dimensions
22 inches (22-inch viewable image
size)
Preset display area:
Horizontal
473.76 mm (18.65 inches)
Vertical
296.1 mm (11.66 inches)
Pixel pitch
0.282 mm
Viewing angle
160°(vertical)typ,160°(horizontal)
typ
Luminance output
300 cd/m ²(typ)
Dynamic contrast ratio
2000 to 1 (typ)
Faceplate coating
ARC-Glare (2H)
Backlight
CCFL (4) edgelight system
Response Time
2ms typical (Grey to Grey)
Camera - MIC Specifications
Overview
The integrated USB camera and digital microphones allow you to take pictures, videos, and communicate with other computer users. The
camera is located at the top of
the monitor and is fixed. However, the camera’s software--Dell Webcam Software
suite, provides limited panning abilities. When the camera is on, the blue light next to
the camera turns on.
Lens
Field of view
66.5 degree +/- 5 %

Focus mode
Fixed Focus

Focus area
49cm~Infinity

Focusingdistance(normalmode)
1100 mm
Image Sensor
Active array size
2.0 mega-pixel
Video specification
Video frame rate
1600 x 1200 (UXGA) - up to 10 frames per second

640 x 480 (VGA) and below - up to 30 frames per second

Image flip
Horizontally

Digital zoom
2x
Audio Specification
Microphone type
Dual Microphone
Interface
USB 2.0 high Speed
Power Supply
3.3 volts+- 5%
System Requirements
The following are the minimum system requirements for Camera - MIC feature:
l Intel®Pentium®4 or AMD®equivalent processor running at 1.8 GHz or higher (Recommended: Intel Pentium 4, 2.8 GHz with Hyper-Threading enabled)
l Microsoft®Windows®XP Service Pack 2 or Windows Vista
l 256 MB RAM (512 MB RAM or higher recommended)
l 580 MB free hard disk space
l Available USB 1.1 port or a USB 1.1 hub with external power supply (USB 2.0 required for maximum frame rate and resolution)
l CD-ROM/DVD-ROM drive for software installation
Dell Webcam Software Suite