Preset Display Modes
ST2220
Electrical
Physical Characteristics
Horizontal Frequency
(kHz)
Sync Polarity (Horizontal/Vertical)
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input voltage/frequency/current
100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
120 V: 30 A (Max.)
240 V: 60 A (Max.)
l D-sub: Detachable, Analog, 15 pin, shipped attached to the monitor
Dimensions (without stand)