Dell thunderbolt TB16 - Page 12

3 Connect the Thunderbolt 3 (Type-C) connector to the computer.
Figure 4. Connecting the Thunderbolt 3 (Type-C) connector
NOTE: On TB16-supported Dell computers, connecting the Thunderbolt 3 (Type-C) cable will auto wake-up the laptop
and connect any peripherals already attached. This behavior can be disabled in your BIOS Setup option “Wake on Dell
USB-C Docks”.
4 Follow the on-screen instructions to give the Dell Thunderbolt Dock permission to connect to your computer. See Thunderbolt Driver
Settings for more information.
5 Connect multiple displays to the docking station, as needed.
NOTE
: Computers requiring more than 130 W power input must also be connected to their own power adapter for
charging and operating at full performance.
12
Quick Setup of Hardware