Installing the WLAN Card
1. Insert the WLAN card into the connector at a 45–degree angle.
2. Tighten the screw to secure the WLAN card to the computer.
3. Connect the antenna cables to the connectors marked on the WLAN card.
4. Close the plastic cover over the WLAN card.
5. Install the:
a. battery.
b. back cover.
6. Follow the procedure in After Working Inside Your computer.
Removing the Keyboard
1. Follow the procedure in Before Working Inside Your Computer.
2. To remove the keyboard:
a. Using a plastic scribe, lift the edges of the keyboard at the locations indicated.
b. Slide the keyboard toward the display to release it from the computer.
3. To remove the keyboard:
12
To Next Page
Loading...
