Table 26. System Configuration (continued)
Option Description
● Enabled = The internal LAN is enabled.
● Enabled w/PXE = The internal LAN is enabled (with PXE boot) (selected by default)
SATA Operation Allows you to configure the operating mode of the integrated hard drive controller.
● Disabled = The SATA controllers are hidden
● AHCI = SATA is configured for AHCI mode
● RAID ON = SATA is configured to support RAID mode (selected by default)
Drives Allows you to enable or disable the various drives on-board:
● SATA-0 (enabled by default)
● SATA-1 (enabled by default)
● SATA-2 (enabled by default)
● M.2 PCIe SSD-0 (enabled by default)
Smart Reporting This field controls whether hard drive errors for integrated drives are reported during system
startup. The Enable Smart Reporting option is disabled by default.
USB Configuration Allows you to enable or disable the integrated USB controller for:
● Enable USB Boot Support
● Enable External USB Port
All the options are enabled by default.
Audio Allows you to enable or disable the integrated audio controller. The option Enable Audio is
selected by default.
● Enable Microphone
● Enable Internal Speaker
Both the options are selected by default.
Miscellaneous Devices
Allows you to enable or disable the following devices:
● Enable Camera (enabled by default)
Video
Option
Description
LCD Brightness Allows you to set the display brightness depending up on the power source—On Battery and On AC. The
LCD brightness is independent for battery and AC adapter. It can be set using the slider.
NOTE: The video setting is visible only when a video card is installed into the system.
Security
Table 27. Security
Option Description
Admin Password Allows you to set, change, or delete the admin password.
System Password Allows you to set, change, or delete the system password.
Internal HDD-0 Password Allows you to set, change or delete the internal HDD password.
Strong Password This option lets you enable or disable strong passwords for the system.
System setup 21
To Next Page
Loading...
