Dell Vostro 3481 - Power Management

Option Description
Data Wipe This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next
boot' is not enabled by default. The following is list of devices affected:
● Internal SATA HDD/SSD
● Internal M.2 SATA SDD
● Internal M.2 PCIe SSD
● Internal eMMC
BIOS Recovery This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user
primary hard drive or an external USB key.
● BIOS Recovery from Hard Drive—enabled by default
● Always perform integrity check—disabled by default
Power management
Option
Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
Default setting: Wake on AC is not selected.
Enable Intel
Speed Shift
Technology
● Enable Intel Speed Shift Technology
Default setting: Enabled
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
● Disabled
● Every Day
● Weekdays
● Select Days
Default setting: Disabled
USB Wake
Support
Allows you to enable USB devices to wake the system from Standby.
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
● Enable USB Wake Support
Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when
triggered by a LAN signal.
● Disabled
● WLAN
Default setting: Disabled
Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After
you enable this option, your system runs only in battery even if the AC is attached.
● Enable peak shift—is disabled
● Set battery threshold (15% to 100%) - 15 % (enabled by default)
Advanced
Battery Charge
Configuration
This option enables you to maximize the battery health. By enabling this option, your system uses the
standard charging algorithm and other techniques, during the non work hours to improve the battery
health.
Enable Advanced Battery Charge Mode- is disabled
26 System setup