Table 29. Intel Software Guard Extensions (continued)
Option Description
● 32 MB
● 64 MB
● 128 MB—Default
Performance
Table 30. Performance
Option Description
Multi Core Support
This field specifies whether the process has one or all cores
enabled. The performance of some applications improves with
the additional cores.
● Enable = 2 cores are enabled
● Disabled = 1 core is enabled
Intel SpeedStep
Allows you to enable or disable the Intel SpeedStep mode of
processor.
● Enable Intel SpeedStep
This option is set by default.
C-States Control
Allows you to enable or disable the additional processor sleep
states.
● C states
This option is set by default.
Hyper-Thread Control
Allows you to enable or disable the HyperThreading in the
processor.
● Disabled
● Enabled—Default
POST behavior
Option
Description
Adapter
Warnings
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
Default setting: Enable Adapter Warnings
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys. The available options are:
● Fn Lock—enabled by default
● Lock Mode Disable/Standard
● Lock Mode Enable/Secondary—enabled by default
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
● Minimal
● Thorough-enabled by default
● Auto
24 System setup
To Next Page
Loading...
