Steps
1. Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly.
2. Route the coin-cell battery cable through the routing guide.
3. Connect the coin-cell battery cable to the system board.
Next steps
1. Install the 4-cell battery.
2. Install the 3-cell battery.
3. Install the base cover.
4. Follow the procedure in After working inside your computer.
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following image indicates the location of WLAN card and provides a visual representation of the removal procedure.
22
Removing and installing components
To Next Page
Loading...
