Removing the Display Inverter
1. Remove the display assembly (see Display).
2. Remove the display bezel (see Removing the Display Bezel).
3. Disconnect the cables from the connectors on either side of the inverter board.
4. Lift out the inverter board from the securing plastic tabs.
Replacing the Display Inverter
1. Align the holes on the inverter board with the tabs on the display cover and snap it into position.
2. Connect the cables on either side of the inverter board.
3. Replace the display bezel (see Replacing the Display Bezel).
4. Replace the display assembly (see Display).
Back to Contents Page
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
To Next Page
Loading...
