Removing The Heat Sink 20
1. Follow the procedures in
Before Working On Your Computer
.
2. Remove the
battery
.
3. Remove the
Subscriber Identity Module (SIM) card
.
4. Remove the
Secure Digital (SD) card
.
5. Remove the
base cover
.
6. Remove the
keyboard
.
7. Remove the
hard drive
.
8. Remove the
memory
.
9. Remove the
palm rest
.
10. Remove the
Wireless Wide Area Network (WWAN) card
.
11. Remove the
Wireless Local Area Network (WLAN) card
.
12. Remove the
display assembly
.
13. Remove the
system board
.
14. Disconnect the heat sink cable from the system board.
15. Loosen the captive screws that secure the heat sink to the system board.
57
To Next Page
Loading...
