Installing The Input/Output (I/O) Board
1. Insert the I/O board into its slot.
2. Connect the speaker cable to the I/O board.
3. Install the
system board
.
4. Install the
display assembly
.
5. Install the
heat sink
.
6. Install the
Wireless Wide Area Network (WWAN) card
.
7. Install the
Wireless Local Area Network (WLAN) card
.
8. Install the
palm rest
.
9. Install the
memory
.
10. Install the
hard drive
.
11. Install the
keyboard
.
12. Install the
base cover
.
13. Install the
Secure Digital (SD) card
.
14. Install the
Subscriber Identity Module (SIM) card
.
15. Install the
battery
.
16. Follow the procedures in
After Working Inside Your Computer
.
66
To Next Page
Loading...
