Dell Vostro V131 - Installing The Low-Voltage Differential Signalling (LVDS) Cable

Installing The Low-Voltage Differential Signalling (LVDS) Cable
1. Route the LVDS cables onto its holder on the display top cover.
2. Connect the LVDS cable to the camera module.
3. Install the display hinge .
4. Install the display assembly .
5. Install the display panel .
6. Install the palm rest .
7. Install the hard drive .
8. Install the keyboard .
9. Install the base cover .
10. Install the battery .
11. Follow the procedures in After Working Inside Your Computer .
72