Dell VxRail E660F - Chapter 2: System Overview; Front View of the System

System overview
VxRail E660 and E660F are a 1U server that supports:
● Up to two 3
rd
Generation Intel Xeon Scalable processors, with up to 40 cores per processor
●
32 DIMM slots
● Two fault tolerant redundant (FTR) AC power supply units
● Up to 10 x 2.5-inch drives (with two universal slots to support optional NVMe drives)
VxRail E660N is a 1U server that supports:
● Up to two 3
rd
Generation Intel Xeon Scalable processors, with up to 40 cores per processor
● 32 DIMM slots
● Two fault tolerant redundant (FTR) AC power supply units
● Up to 10 x 2.5-inch all NVMe drives
NOTE: All instances of SAS, SATA, NVMe drives are referred to as drives in this document, unless specified otherwise.
For more information about supported drives, see the Dell VxRail™ E660, E660F, and E660N Technical Specifications.
Front view of the system
Front view of 10 x 2.5-inch drive system
Item
Ports, panels, and
slots
Icon Description
1 Left control panel N/A
Contains the system health, system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
NOTE: The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
● Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see the Status LED indicators section.
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled
system. The Quick Sync feature is optional. This feature
allows management of the system by using mobile devices
called as OpenManage Mobile (OMM) feature. Using iDRAC
Quick Sync 2 with OpenManage Mobile (OMM) aggregates
hardware or firmware inventory and various system level
diagnostic and error information that can be used in
troubleshooting the system. For more information, see
the Dell VxRail™ E660, E660F, and E660N Technical
Specifications.
2
System overview 7