NOTE: A fully discharged battery takes about 4 to 5 hours to fully charge.
Turning on your tablet
When you turn on the tablet for the first time, you must finish Windows setup to
start using your tablet. For more information, see the Quick Start Guide that shipped
with your tablet.
1 Press and hold the power button for 2 seconds to turn on your tablet. The lock
screen appears.
2 Swipe up your finger from the bottom of the display to switch to the login
screen, and then enter password to log in to Windows.
NOTE: If the login screen is not enabled, the Start screen appears after the
lock screen.
The tablet is ready for use when the Windows Start screen is displayed.
Inserting a microSD card
1 Open the slot cover and locate the microSD card slot.
CAUTION: Ensure that the microSD card is aligned as shown in the
image.
2 Insert the microSD card into the card slot until it locks into place.
Setting up your tablet 10
To Next Page
Loading...
