Dell XPS 9530 - Removing the System Badge; Prerequisites; Procedure

Removing the System Badge | 13
Removing the System Badge
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9. For additional
safety best practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
Remove the base-cover assembly. See "Removing the Base-Cover Assembly" on
page 10.
Procedure
1 Peel the Mylars that secure the system badge to the base-cover assembly.
2 Turn the base-cover assembly over.
1 Mylar (2)
1