Removing the Fans | 33
Removing the Fans
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base-cover assembly. See "Removing the Base-Cover Assembly" on
page 10.
2 Remove the battery. See "Removing the Battery" on page 16.
Procedure
1 Remove the screws that secure the fans to the system board.
2 Disconnect the camera cable from the I/O board.
3 Disconnect the fan cables from the system board.
4 Lift the fans away from the palm-rest assembly.
1 screws (2) 2 camera cable
3 fan cables (2)
To Next Page
Loading...
