46 | Removing the System Board
2 Disconnect the speaker cable, hard-drive cable, and power-adapter cable from the
connectors on the system board.
3 Use the pull-tabs and disconnect the touch-panel cable and display cable from the
system board.
4 Lift the connector latches and disconnect the keyboard-backlight cable, the
touchpad cable, the NFC cable, and the hard-drive cable from the system board.
5 Peel off the tape, lift the connector latch, and disconnect the keyboard cable from
the system board.
1 power-adapter port cable 2 touch-panel cable
3 display cable 4 hard-drive cable
5 speaker cable 6 NFC cable
7 keyboard cable 8 touchpad cable
9 keyboard-backlight cable
To Next Page
Loading...
