58 Using Multimedia
1
Turn off the computer and the TV and/or audio device that you want to connect.
2
Connect the component video adapter to the S-video TV-out connector on
your computer.
3
Plug all three ends of the component video cable into the component video-
output connectors on the component video adapter. Make sure that the red,
green, and blue colors of the cable match the corresponding adapter ports.
1 component video adapter 2 component video cable
3 standard audio cable
1 component video adapter 2 component video cable
1
2
3
21
book.book Page 58 Friday, April 25, 2008 3:58 PM
To Next Page
Loading...
