Need help?Do you have a question about the Dell Dimension XPS R Series and is the answer not in the manual?
Details the hardware and software capabilities of the Dell Dimension XPS Rxxx systems.
Describes the PCI, ISA, and AGP expansion slot capabilities.
Explains the EIDE interfaces and device configuration for drives.
Provides information on the system's 200-W power supply and voltage ranges.
Procedures for gathering information from users when diagnosing problems.
Steps for checking the computer's exterior for damage and connection issues.
Monitoring system behavior during startup to identify potential issues.
Procedures for visually checking internal components for proper seating and connections.
Methods for identifying and resolving IRQ and DMA conflicts.
Instructions for using the built-in diagnostic tools to test system components.
Lists beep code sequences and their probable causes during system startup.
Details system messages that appear during boot or operation and their corrective actions.
Lists essential tools required for component removal and replacement procedures.
Safety guidelines and steps to protect the user and equipment before servicing.
Procedures for removing the computer's outer cover and front bezel.
Steps to remove the main assembly that holds storage drives.
Steps for removing both primary and secondary hard-disk drives.
Procedure for safely removing the system's power supply unit.
Instructions for removing and installing memory modules (DIMMs).
Procedure for removing the microprocessor SEC cartridge and heat sink.
Steps for safely replacing the system's CMOS battery.
Detailed procedure for removing and reinstalling the main system board.
Describes the main screens and navigation within the System Setup utility.
Details options for basic system configuration, memory, and BIOS version.
Covers advanced settings including Plug and Play, and submenus for configuration.
Configures serial, parallel ports, and IDE drive settings.
Options for setting user and setup passwords and access controls.
Configuration options for system power saving features.
Settings for determining the order of boot devices.
To Next Page
General