Basic Troubleshooting 2-7
If no errors are found in main memory, the diagnostics loads and the Diagnos-
tics Menu displays. This menu lets you choose the following options or exit to
the MS-DOS
®
prompt:
Run Quick Tests — Runs selected tests from all test groups to quickly
locate a failure or to indicate where further testing is needed to isolate a
failure
Run All Tests — Runs all tests for a thorough check of the system
Run Specific Tests — Tests a particular area or subsystem
*HWWLQJ+HOS
If none of the troubleshooting procedures in this chapter or the tests in the
Dell Diagnostics reveal the source of the problem or lead to the proper trouble-
shooting steps for determining the source of the problem, call Dell for
technical assistance. For instructions, see Chapter 8, “Getting Help,” in the
Reference and Troubleshooting Guide
.
To Next Page
Loading...
Need help?
General