Using Multimedia 57
6
Plug the other end of the digital audio cable into the S/PDIF input
connector on your TV or other audio device.
7
Turn on the TV, turn on any audio device that you connected (if
applicable), and then turn on the computer.
8
See "Enabling the Display Settings for a TV" on page 63 to ensure that the
computer recognizes and works properly with the TV.
Component Video and Standard Audio
1 composite video adapter 2 S/PDIF digital audio cable
1 S-video TV-out connector 2 component video adapter
1 2
2
1
book.book Page 57 Friday, April 25, 2008 3:58 PM
To Next Page
Loading...
